Scrapbooking Beyond the Page
Papercrafts lend themselves to so many things that we will only ever be able to cover a few of them here. Here at SCRAP 'n' YAP we hope to inspire you to try as many of the paper crafts as we can. Take a look at the latest projects among these pages and don't forget to give us your feedback or suggestions firstname.lastname@example.org
If ever you are on the Fleurieu Peninsula in South Australia remember to call in and see us. In the meantime enjoy the projects.
Super Simple Asian-Inspired Cigar Box Purse
by Sara Naumann
Cigar box purses are all the rage! In fact, decorated cigar box purses can sell at fashionable boutiques for $80.00 and up! Designer Paris Dukes loved the idea of a simple wooden box with collaged images, fibers and three-dimensional embellishments, but didn’t love the idea of spending so much money! The solution? A collaged cigar box purse she made herself!
“After visiting the
Basic Cigar Box Tips:
Preparing the box:
Use the screwdriver to remove the hardware from the box; set the hardware aside. Or, use masking tape to cover the hardware, trimming it around the edges to expose all the wood surface.
Lightly sand the box outside and inside. Wipe the box clean with a soft cloth. Apply a coat of sealer to the box outside and inside; let dry. Paint the box as indicated in the main instructions and let dry. Re-attach the hardware.
If painting with the hardware on the box, use a small tip paintbrush and carefully paint around the hardware.
Attaching the pull handle set:
Insert the screw into the drilled hole from the lid inside and tighten with a screwdriver to secure the handle base in place. Use a drill to make holes in each side of the lid for the handle base pieces. For a flush mount, drill the hole the same size as the mounting stem. For a raised mount, drill the smaller hole size to fit the screw.
Attaching the hardware:
Unscrew one end of the handle. Thread beads onto the handle, then screw the end back onto the handle. Attach a clasp button to each handle clamp. Insert the handle base into the clasp button, then press it closed. Repeat for the other side.
Align the handle clamps on the box side opening edge. Insert the screws into the screw holes and tighten to secure the handle clamps in place. After preparing the wood surface, replace the original latch set onto the box, or try an alternate latch set for a unique look. Insert the screws into the screw holes and tighten to secure.
The purse back features stamps and a writing panel with torn edges, then a cut out floral panel for added interest. The mica corners give a translucent look to the edges.
Paris designed this project for Cigar Box Purses, a book-with-art collection that contains instructions for 20 cigar box purses plus original vintage-style cigar box art to create 12 boxes. These boxes make fabulous gifts for girlfriends and sisters. Or, leave off the purse handle and decorate a cigar box for the guy in your life.
• 7"x5 1/2"x2 1/2" wood cigar box with hinges and closing clasp
• 5 1/2"x 3 3/4" brass handle frame
• 1 1/4" brass handle clamps
• two 1" brass clasp buttons
• assorted brass and purple glass beads
• 4 wavy-edge brass corners
• textured patterned paper from Artsy Collage™ Part not in database (may have been discontinued): #4334
• stamps, floral labels, word art images from Artsy Collage™ Asian Paper Art
• mah-jong tiles, mica, key from Paper Pizazz® Far East Treasures
• purple fibers from Paper Pizazz® Grape Jelly Fibers
• Artsy Collage™ Decoupage & Collage Gel
• Artsy Collage™ The Ultimate Glue
• acrylic paints: lavender, purple
• sea sponge
• liquid acrylic sealer
• 1" wide foam paintbrush
• fine grain sandpaper
• Phillips head screwdriver
• drill with bits (for pull handle set installation)
• awl (or hammer and nail)
• soft cloth
Copyright © 2007, Hot Off The Press, Inc.
Nearby Service areas are: Back Valley, Encounter Bay, Hayborough, Hindmarsh Valley, Inman Valley, Lower Inman Valley, Mccracken, Mount Jagged, Victor Harbor Central, Waitpinga, Willow Creek